Table 4-4 Meanings Of Power And Okay To Remove Leds; Table 4-5 Meanings Of Power And Fault Leds - Sun Microsystems Netra CT Service Manual

Meanings of Power and Okay to Remove LEDs
TABLE 4-4
LED State Power LED
Component is installed and
On, Solid
configured.
On, Flashing Component is installed but is
unconfigured or is going through the
configuration process.
Off Component was not recognized by
the system or is not installed in the
slot.
Meanings of Power and Fault LEDs
TABLE 4-5
LED State Power LED
On, Solid Component is installed and
configured.
On, Flashing Component is installed but is
unconfigured or is going through the
configuration process.
Off Component was not recognized by
the system or is not installed in the
slot.
Okay to Remove LED
Component is Okay to Remove. You
can remove the component from the
system, if necessary.
Not applicable.
Component is not Okay to Remove.
Do not remove the component while
the system is running.
Fault LED
Component has failed. Replace the
component.
Not applicable.
Component is functioning properly.
Chapter 4 Troubleshooting the System 4-7