Power supply unit air filters
I
Main air filters
I
The instructions for removing and replacing these hot-swappable FRUs are covered
in
Part
1.5.2
Cold-Swappable FRUs
The FRUs listed below are cold-swappable:
Single power supply in a Netra CT 410 server
I
Single or lone remaining power supply in a Netra CT 810 server
I
Single hard disk drive in a Netra CT 410 server
I
Single or lone remaining hard disk drive in a Netra CT 810 server
I
Power distribution units
I
Powered-off or empty servers
I
The instructions for removing and replacing these cold-swappable FRUs are covered
in
Part
1.6
Device Names
1.6.1
Device Names for I/O Card Slots in the Netra CT
Servers
TABLE 1-1
and
TABLE 1-2
server.
TABLE 1-1
Slot Number
2
3
4
3. The system controller board is hot-swappable only if the alarm card and host CPU card are also installed in
the Netra CT server.
1-8
Netra CT Server Service Manual • January 2004
III.
IV.
gives the device names for the I/O card slots in the Netra CT 810 server
gives the device names for the I/O card slots in the Netra CT 410
Device Names for I/O Card Slots in the Netra CT 810 Server
Device Name
/devices/pci@1f,0/pci@1/pci@1/pci@f
/devices/pci@1f,0/pci@1/pci@1/pci@e
/devices/pci@1f,0/pci@1/pci@1/pci@d
Need help?
Do you have a question about the Netra CT and is the answer not in the manual?