Host Cpu Rear Transition Card - Sun Microsystems Netra CT Service Manual

6.3.1

Host CPU Rear Transition Card

This section tells how to remove and replace a host CPU rear transition card. This
card is present only in the rear-access model of the Netra CT server.
Note – The procedures in this section apply only to the rear-access model of the
Netra CT server; the procedures in this section do not apply to a front-access model
of the Netra CT server.
Use only the Netra CT-supported host CPU rear transition card in the Netra CT
server; do not use the XCP2040-TRN I/O transition card that is available with the
Netra CP2140 board. Refer to
card you have is supported or unsupported on a Netra CT server.
6-32 Netra CT Server Service Manual • January 2004
to determine if the host CPU rear transition
FIGURE 6-16