Sun Microsystems Netra CT Service Manual page 130

For the netra ct 810 server and netra ct 410 server
Hide thumbs Also See for Netra CT:
Table of Contents

Advertisement

6.3.2.2
I/O Rear Transition Card Set
The I/O rear transition card set consists of two separate cards:
The front I/O card (front)
I
The I/O rear transition card (rear)
I
The front I/O card contains the ASICs for the associated I/O card and is installed
from the front of the server; however, no cables are connected to the front I/O card.
The I/O rear transition card extends the ports for a particular I/O card to the rear of
the server. The I/O rear transition card and the front I/O card must be installed in
the same slot at the front of the server in order for the I/O rear transition card to
work. For example, if you install an I/O rear transition card in I/O slot 3 at the rear
of a Netra CT 810 server, you must also install the accompanying front I/O card in
I/O slot 3 at the front of the server.
When one of the two cards fails, you may not be able to determine which of the two
cards has failed. Because of this, you may want to replace both the front I/O card
and the I/O rear transition card.
representations of how the front I/O cards should align with the I/O rear transition
cards (RTCs). Note that, if you are facing the front of the server, the I/O slots read
from left to right, whereas they read from right to left if you are facing the rear of the
server.
6.3.2.3
Removing and Installing Satellite CPU or I/O Rear Transition
Card Sets
If you are removing and replacing faulty cards in the server, first to go
I
a Satellite CPU or I/O Rear Transition Card" on page
a Satellite CPU or I/O Rear Transition Card" on page
If you are installing new cards in the server, go to
I
I/O Rear Transition Card" on page
Removing a Satellite CPU or I/O Rear Transition Card
1. Attach the antistatic wrist strap.
Refer to
2. Locate the card slot that holds the satellite CPU or I/O card.
FIGURE 6-21
I
I
FIGURE 6-22
6-40
Netra CT Server Service Manual • January 2004
Section 1.2, "Attaching the Antistatic Wrist Strap" on page
shows the satellite CPU or I/O card slots in a Netra CT 810 server.
shows the satellite CPU or I/O card slots in a Netra CT 410 server.
and
FIGURE 6-21
FIGURE 6-22
"Installing a Satellite CPU or
6-42.
give graphical
"Removing
6-40, then go to
"Installing
6-42.
1-2.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Netra CT and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Netra ct 810Netra ct 410

Table of Contents