How This Book Is Organized - Sun Microsystems Netra CT Service Manual

How This Book Is Organized

Part I "Preparing for
Chapter 1
or replacing field-replaceable units (FRUs) in a Netra CT server.
Chapter 2
server on and off.
Chapter 3
Part II "Troubleshooting the
Chapter 4
Part III "Replacing Hot-Swappable
Chapter 5
Chapter 6
Chapter 7
removable media.
Chapter 8
subassemblies.
Part IV "Replacing Cold-Swappable
Chapter 9
and Netra CT 410 server.
Chapter 10
subassemblies.
Part V "Illustrated Parts
Chapter 11
Part VI "Appendixes, Glossary, and
Appendix A
Appendix B
Appendix C
Appendix D
xviii Netra CT Server Service Manual • January 2004
Service"
describes the procedures you need to perform before installing, removing,
gives the hardware and software procedures for powering the Netra CT
provides instructions for handling the cPCI cards and assemblies correctly.
System"
provides troubleshooting procedures for the Netra CT server.
describes the hot-swap software commands.
gives instructions for removing and replacing hot-swappable cards.
contains instructions for removing and replacing hard disk drives and
gives instructions for removing and replacing hot-swappable
provides instructions for removing and replacing the Netra CT 810 server
gives instructions for removing and replacing cold-replaceable
Breakdown"
gives the illustrated parts breakdown for the Netra CT server.
lists the connector pinouts for the cards in the Netra CT server.
provides instructions for connecting a terminal console to the server.
gives the error messages for the Netra CT server.
gives the system specifications for the Netra CT server.
FRUs"
FRUs"
Index"