Error Messages - Sun Microsystems Netra CT Service Manual

C
A P P E N D I X

Error Messages

This appendix gives several error messages that you might see while operating or
servicing your Netra CT server, their meanings, and the actions necessary for each.
All error messages in this appendix are written to the /var/adm/messages file on
your system.
Netra CT Server Error Messages
TABLE C-1
Error Message
scsb Error Messages
Alarm and Slot presence state bits do not match!
SCSB: Should NOT remove SCB(#) while cPCI Slot # is in RESET with a
possible bad board. scsb#0: Slot # Now out of Reset!
scsb#0: ALERT! Lost HEALTHY# on Slot #, Occupant Offline scsb#0: ALERT!
Lost HEALTHY# on Slot #, Occupant Online!!!
scsb#0: Bad (non friendly ?) Board in Slot # ? Taking it Offline.
scsb#0: Could not Update %s LEDs. scsb#0: Could not Blink %s LEDs.
scsb#0: hsc_board_healthy: No Slot Info.
scsb#0: hsc_enum_intr: No Last Board Insertion Info.
scsb#0: hsc_restore: Cannot reset disconnected slot #
scsb0: I2C TRANSFER Failed scsb0: Error Reading Healthy# Registers
scsb#0: scsb_reset_slot: error reading Reset regs
scsb#0: no HEALTHY# signal on slot#
scsb#0: Reset Not Asserted on Healthy# Failed slot#
scsb#0: slot # Occupant configured, Regained HEALTHY#! scsb#0: slot #
Occupant Unconfigured, Regained HEALTHY#!
Page Number
page C-3
page C-3
page C-3
page C-4
page C-4
page C-5
page C-5
page C-6
page C-6
page C-7
page C-7
page C-8
C-1