Sun Microsystems Netra CT Service Manual page 12

LEDs on the System Status Panel (Netra CT 810 Server) 8-14
FIGURE 6-6
LEDs on the System Status Panel (Netra CT 410 Server) 8-14
FIGURE 6-7
Aligning the Card with the Card Cage Cutouts 8-19
FIGURE 6-8
Tightening the Ejection Lever Captive Screws 8-20
FIGURE 6-9
Connectors for the Single-Wide 6U Alarm Card 8-26
FIGURE 6-10
Connectors for the Double-Wide 3U Alarm Card 8-27
FIGURE 6-11
Connectors on the Host CPU Card 8-28
FIGURE 6-12
Host CPU Front Transition Card Location in a Netra CT 410 Server 8-29
FIGURE 6-13
Connectors on the Host CPU Front Transition Card (Netra CT 410 Server) 8-31
FIGURE 6-15
Supported and Unsupported Host CPU Rear Transition Card for a Netra CT Server 8-33
FIGURE 6-16
Locating the Host CPU Rear Transition Card in the Rear-Access Model of a Netra CT 810
FIGURE 6-17
Server (Top View) 8-34
Locating the Host CPU Rear Transition Card in the Rear-Access Model of a Netra CT 410
FIGURE 6-18
Server (Top View) 8-35
Aligning the Card with the Rear Card Cage Cutouts 8-36
FIGURE 6-19
Connectors on the Host CPU Rear Transition Card 8-37
FIGURE 6-20
Supported Locations for Satellite CPU or I/O Rear Transition Card Sets in a Netra CT 810
FIGURE 6-21
Server (Top View) 8-39
Supported Locations for Satellite CPU or I/O Rear Transition Card Sets in a Netra CT 410
FIGURE 6-22
Server (Top View) 8-39
Supported Location for the Alarm Rear Transition Card in a Netra CT 810 Server (Top
FIGURE 6-23
View) 8-44
Supported Location for the Alarm Rear Transition Card in a Netra CT 410 Server (Top
FIGURE 6-24
View) 8-44
Connectors on the Alarm Rear Transition Card 8-46
FIGURE 6-25
Locating the Hard Disk Drive LEDs on the System Status Panel (Netra CT 810 Server) 9-6
FIGURE 7-1
Drive Bay Cover Locations 9-7
FIGURE 7-2
Removing the Removeable Media Module from a Netra CT 810 Server 9-12
FIGURE 7-3
System Status Panel Locations 10-2
FIGURE 8-1
Removing the System Status Panel (Netra CT 810 Server) 10-3
FIGURE 8-2
Removing the System Status Panel (Netra CT 410 Server) 10-4
FIGURE 8-3
Positioning the System Status Panel (Netra CT 810 Server) 10-5
FIGURE 8-4
xii Netra CT Server Service Manual • January 2004