Table Of Contents - Sun Microsystems Netra CT Service Manual

Contents
Part I Preparing for Service
1. Preparing for FRU Installation and Replacement 1-1
1.1 Tools Required 1-1
1.2 Attaching the Antistatic Wrist Strap 1-2
1.3 Determining If You Have a Front-Access or Rear-Access Model 1-3
1.4 Determining If You Have AC- or DC-Powered Servers and Chassis 1-4
1.5 FRU Categories 1-7
1.5.1
1.5.2
1.6 Device Names 1-8
1.6.1
1.6.2
2. Powering the Server Off and On 2-1
2.1 Powering On the Server 2-2
2.1.1
2.2 Powering Off the Server 2-6
2.2.1
2.2.2
Hot-Swappable FRUs 1-7
Cold-Swappable FRUs 1-8
Device Names for I/O Card Slots in the Netra CT Servers 1-8
Device Names for Hard Disk Drives 1-9
Verifying Full Power-Up 2-5
To Perform a Hardware Power-Off 2-6
To Perform a Software Power Off 2-7
iii