Sun Microsystems Netra CT Service Manual page 5

5. Hot Swap Software Commands 7-1
5.1 Understanding Hot Swap 7-1
5.1.1 How High Availability Hot Swap Works 7-2
5.1.2 Hot Swap with Boards That Don't Support Full Hot Swap 7-2
5.1.3 System Status Panel LED States and Meanings 7-2
5.2 Using the cfgadm Utility 7-4
5.2.1 Logging In to the Netra CT Server 7-4
5.2.2 Running the cfgadm Utility 7-4
5.2.3 Basic and Full Hot Swap cfgadm Commands 7-5
6. Removing and Replacing Hot-Swappable Cards 8-1
6.1 Main Cards 8-2
6.1.1 Rules and Restrictions for Hot-Swapping Main Cards 8-6
6.1.2 Removing and Replacing Main Cards 8-8
6.2 Front-Transition Card 8-28
6.2.1 Removing a Host CPU Front Transition Card 8-29
6.2.2 Installing a Host CPU Front Transition Card 8-30
6.3 Rear-Transition Cards 8-31
6.3.1 Host CPU Rear Transition Card 8-32
6.3.2 Satellite CPU or I/O Rear Transition Card 8-38
6.3.3 Alarm Rear Transition Card 8-43
7. Removing and Replacing Hard Disk Drives and Removeable Media 9-1
7.1 Hard Disk Drive 9-2
7.1.1 Removing a Hard Disk Drive 9-3
7.1.2 Installing a Hard Disk Drive 9-8
7.2 DVD or DAT Drive (Netra CT 810 Server Only) 9-9
7.2.1 Removing a DVD or DAT Drive 9-10
7.2.2 Installing a DVD or DAT Drive 9-13
Contents v