Kirk Handset Registration And Subscription; Registering Kirk Handsets - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Handset Registration and
Subscription
Note

Registering KIRK Handsets

This section provides information about handset registration and
subscription. You must register and subscribe a handset before you can use it.
This section only describes how to register handsets on the KWS6000. You
also need to register the users on the call handler. For registering users on
the call handler, refer to the call handler user guide.
When registering handsets you enter information about the handsets settings
(such as; the handsets serial number (IPEI), name etc.) in the system database.
When subscribing handsets you subscribe a registered handset to the system
for usage. If the handset is not registered in the system database, subscription
of the handset is not possible.
This section includes information about:
• "Registering KIRK Handsets"
• "Subscribing KIRK Handsets"
To register handsets you use the web based Administration Page of the
KWS6000.
Each handset in the wireless solution must be programmed with the serial
number (IPEI) before it can operate. This serial number must be registered in
the web based Administration Page of the KWS6000. Serial numbers are a
unique fingerprint of each handset. The serial number is programmed into the
handset during the manufacturing process and cannot be changed by field
personnel.
on page 13-1
on page 13-3
13
13–1