Retrieving Serial Number On Kirk 4020/Kirk 4040/Kirk 4080; Handsets - Polycom KIRK 6000 Installation And Configuration Manual

Retrieving Serial Number on KIRK 4020/KIRK 4040/KIRK 4080 Handsets
Note
This section describes how to retrieve the serial number on a 4020/4040/4080
Handset.
Use a screwdriver to unscrew the plate on the rear of the handset to
1
access the battery compartment.
The plate on the rear of the 4080 Handset must not be removed in a
2
potentially explosive atmostphere.
Insert the screwdriver into the small crack behind the blind cover and
3
press to open the handset.
Figure 8-11 Remove Back Cover from Handset with Screw Fastener
Lift the battery and read the serial number.
4
Replace battery and back cover.
5
To show the serial number on the handset display, press *99984*, and then
press ; the serial number appears on the handset display. Press < for 5
seconds to exit the menu.
Preparing KIRK Handset for Use
8–13