General Configuration - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

General Configuration

10–8
On the Configuration/General page you define IP, DNS and NTP settings for
the KWS6000.
Click Configuration, and then click General.
1
Figure 10-7 Adm. Page WS: Configuration/General page
Click Use Static IP Address.
2
In the IP Addr field, type the IP address of the KWS6000.
3
In the Netmask field, type a new network mask (optional).
4
Contact your system administrator for more information.
In the Gateway field, type the IP address of the default gateway
5
(optional).
The default gateway serves as an access point to another network.
Contact your system administrator for more information.
In the MTU field (Maximum Translation Unit), type the size of the largest
6
packet, that your network protocol can transmit (optional).
7 In the Domain field, type the domain name of the system (optional).
In the Server field (under DNS - Domain Name System), type the IP
8
address of the DNS server (optional).
In the Server field (under NTP - Network Time Protocol), type the IP
9
address of the NTP server from which the system will obtain the current
time (optional).
10 From the Time Zone list, select the wanted time zone (optional).
11 Click Save to save your general configuration data.