Kirk Handsets; Environmental Requirements; Electrical Requirements; Kirk Maintenance Software - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

KIRK Handsets

KIRK Maintenance Software

Note
2–10

Environmental Requirements

• The area where the handset is used must be within the temperature ranges
of 0°C and 40°C/32°F and 104°F.
• For correct battery charging, the room temperature must be between 0°C
and 25°C/32°F and 77°F. Therefore, the handset must not be placed in
direct sunlight. The battery has a built-in heat sensor which will stop
charging if the battery temperature is too high.
• For battery information, refer to
The area where the handset is used must be between 20% and 80%
•
non-condensing relative humidity.

Electrical Requirements

The following electrical requirement must be met:
• The supplied power (power supply) for the charger must be 110 V to 120
V ac nominal (or 220 V to 230 V ac nominal), 50/60 Hz.
This section describes the computer requirements to run the installation and
maintenance tools of the handset and repeater.

Software Requirements

• OS: Windows 2000 (SP4), Windows XP (SP2), Windows Vista
• CPU: Minimum 400MHz (2000/XP), 1GHz (Vista)
• RAM: Minimum 256 MB (2000/XP), 1 GB (Vista)
• GPU/Display: XGA (1024x768)
• Harddisk: Minimum recommended harddisk size by OS and other
installed applications + 25 MB free space for the application.
Depending on other applications running on the system, CPU, RAM and
harddisk may vary.
"Installing Battery" on page 8-4.