Installing Battery - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

Installing Battery

8–4
Read the following information before you handle the batteries:
• Do not replace the batteries in potentially explosive environments, such as
rooms where flammable liquids or gases are present.
• The battery will explode if disposed of in a fire.
• Do not charge the batteries unless you use the approved charger and the
proper batteries.
• Only use battery type 84743411 in the 3040 Handset, 4020 Handset and
4040 Handset. Do not use these batteries with other products. These
batteries were designed specifically for use with the 3040 Handset, 4020
Handset and 4040 Handset and the charger ONLY. Improper use of the
batteries may result in fire hazard.
• Only use battery type 84743416 in the 4080 Handset. Do not use this
battery with other products. This battery was designed specifically for use
with the 4080 Handset and the charger ONLY. Improper use of the battery
may result in fire hazard.
• Only use battery type 84743418 (ICP73048) in the 5020 Handset. Do not
use this battery with other products. This battery was designed
specifically for use with the 5020 Handset and the charger ONLY.
Improper use of the battery may result in fire hazard.
• Only use battery type 84743418 (ICP73048) in the 5020 Handset. Do not
use this battery with other products. This battery was designed
specifically for use with the 5020 Handset and the charger ONLY.
Improper use of the battery may result in fire hazard.
• Do not do anything that would cause the battery to short circuit.
• Do not let the battery or the charger come into contact with conductive
metal objects.