Adjusting The Kirk Handset; Content Of The Kirk Programming Kit Handset - Polycom KIRK 6000 Installation And Configuration Manual

Adjusting the KIRK Handset

Note

Content of the KIRK Programming Kit Handset

Note
This section only contains information about adjusting the
3040/4020/4040/4080 Handsets.
This section provides information about:
• "Content of the KIRK Programming Kit Handset"
• "Set up of the Hardware for KIRK Handset Adjustment"
• "Adjusting the KIRK Handset with the ServiceTool"
The Programming Kit Handset (Part no. 02319509) for the 3040 Handset
consists of:
• serial cable
• programming stand
• 220V power supply
The Programming Kit Handset (Part no. 02319542) for the 40XX Handset (see
illustration below) consists of:
• serial cable
splitter
•
Figure 14-18 Programming Kit Handset
Splitter
Serial cable
For handset adjustment of the 40XX Handset you use the charger
accompanying the handset.
KIRK Handset Management
on page 14-13
on page 14-14
on page 14-14
14–13