Chapter Overview - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

Chapter Overview

1–2
Where is it? What is it about?
Chapter 2 Introduction to KIRK
Wireless Server
Chapter 3 Deploying the KIRK
Wireless Server 6000
Chapter 4 Installing KIRK Wireless
Server 6000 and KIRK
Media Resource
Chapter 5 Installing KIRK Codec
Module
Chapter 6 Installing KIRK Base
Station
Chapter 7 Installing KIRK Repeater
Chapter 8 Preparing KIRK Handset
for Use
Chapter 9 Basic Network
Configuration
Chapter 10 Configuring KIRK
Wireless Server 6000
Chapter 11 Configuring KIRK Media
Resource
When to use it?
To learn about the different
6000
components in a typical KWS6000
configuration.
To learn how to deploy a KWS6000
Multi-cell installation.
To learn about KWS6000/KIRK
Media Resource and to install it.
To learn about the KIRK Codec
Module and to install it in a KIRK
Media Resource.
To learn about the KIRK Base
Station and to mount it onto wall
indoors.
To learn about the KIRK Repeater
and to mount repeater onto wall or
ceiling indoors.
To prepare KIRK Handsets for use,
installing and charging battery.
To learn about DHCP and TCP/IP
Setup and to assign options to
DHCP server.
To power up the KWS6000,
connect a computer to the
KWS6000, access the web based
Administration Page and configure
the KWS6000 using DHCP or
TCP/IP Setup.
To power up the KIRK Media
Resource, connect a computer to
the KIRK Media Resource, access
the web based Administration Page
and configure the KIRK Media
Resource using DHCP or TCP/IP
Setup.