Installing Kirk Wireless Server 6000 And Kirk Media Resource - Polycom KIRK 6000 Installation And Configuration Manual

Installing KIRK Wireless Server 6000
and KIRK Media Resource
Note
This section provides a description of the KWS6000 and media resource. The
section also provides information about resetting the KWS6000 hardware
using the Reset button on the KWS6000/media resource faceplate.
The installation of a media resource is optional. Installation of a media
resource will augment the number of simultaneous voice calls supported by
a stand-alone server.
Before you install the equipment, ensure that a site planner defines the
locations of the KWS6000 and media resources.
This section contains the following information:
"Description of KWS6000/KIRK Media Resource"
•
• "Installing the KWS6000/KIRK Media Resource"
4
on page 4-2
on page 4-7
4–1