Charging Kirk Handsets; Using The Charger - Polycom KIRK 6000 Installation And Configuration Manual

Charging KIRK Handsets

Using the Charger

Insert battery with the label readable.
3
Replace the back cover by pressing the back cover back in the locked
4
position (when you hear a click the back cover is in position).
Each handset is charged through the use of a handset charger, a compact
desktop unit designed to charge and automatically maintain the correct
battery charge levels and voltage.
The charger for the 3040/4020/4040/4080 Handset is powered by an AC
(115VAC or 230VAC) adapter that supplies the 9VDC at 230mA charger
requirement.
The charger for the 5020 Handset is powered by an AC (110VAC to 240VAC)
adapter that supplies the 8VDC at 350mA charger requirement.
Figure 8-4 Single Charger for 3040 Handset
Preparing KIRK Handset for Use
8–7