Wireless Server Configuration - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

Wireless Server Configuration

10–14
Figure 10-11 Adm. Page WS: Configuration/General page
Click DHCP assigned.
2
In the MTU field (Maximum Translation Unit), type the size of the largest
3
packet, that your network protocol can transmit (optional).
In the Domain field, type the domain name of the system (optional).
4
In the Server field (under DNS - Domain Name System), type the IP
5
address of the DNS server (optional).
6 In the Server field (under NTP - Network Time Protocol), type the IP
address of the NTP server from which the system will obtain the current
time (optional).
From the Time Zone list, select the wanted time zone (optional).
7
Click Save to save your general configuration data.
8
On the Configuration/Wireless Server page you configure the KWS6000 to
allow subscription. If the system does not allow subscription, it is not possible
to subscribe a handset.
Refer to "Wireless Server Configuration" on page 10-9 for more information.