Subscribing Kirk Handsets; Kirk 3040-Handset - Polycom KIRK 6000 Installation And Configuration Manual

Subscribing KIRK Handsets

KIRK 3040-Handset

For more general information about the IPEI number (serial number) and
how to retrieve it, refer to
Handset" on page 8-12.
4 In the Access code field, type the authentication code (AC) (optional)
The authentication code is a subscription password of a maximum of eigth
digits, defined by the technicians, and can be used when connecting the
handset to a KWS6000. The authentication code is a subscription pin code
for the individual handset.
5 In the Standby text field, type a text to be displayed when the handset is
on hook (optional).
In the Username field, type the user part of a SIP URI, e.g. 1234 in John
6
Doe<sip:1234@somecompany.com>.
In the Domain field, type the domain part of a SIP URI, e.g.
7
somecompany.com in John Doe<sip:1234@somecompany.com>
(optional).
Note: If not configured, the default domain will be used.
In the Displayname field, type the name to be displayed (caller ID), e.g.
8
John Doe in John Doe<sip:1234@somecompany.com> (optional).
In the Authentication user field, type a user name (optional).
9
10 The user name will override the Default User field under SIP
Configuration (refer to
11 In the Authentication password field, type a password (optional).
The password will override the Default Password field under SIP
Configuration (refer to
12 In the Local number field, type the local number of the handset
(optional).
Typing a local number makes it possible to send an MSF to the subscribed
handset.
13 Click Save to save the registration(s).
A handset can be subscribed to more systems and will automatically log on to
the relevant system. If a handset is subscribed to two or more systems, you can
use Auto Login type A to change between the systems automatically.
When to use Auto Login type A:
KIRK Handset Registration and Subscription
"Retrieving the Serial Number of the KIRK
"SIP Configuration" on page 10-10).
"SIP Configuration" on page 10-10).
13–3