How To Access The Administration Page; Entering A System User Name And Password - Polycom KIRK 6000 Installation And Configuration Manual

How to Access the Administration Page

Note
Click Use the following IP address, and then type 192.168.0.2 in the IP
4
address field.
In the Subnet mask field, type 255.255.255.0.
5
Click OK.
6
You can now reach the media resource using a standard web browser.
The web based Administration Page is accessed through a standard web
browser.
Open a web browser.
1
The base station is pre-configured with DHCP. If no DHSP server is
available, the base station will fall back to the static address
http://192.168.0.1 after a few
The KWS6000 Administration Page appears.
Figure 11-4 Main page of the Administration Page for wireless server

Entering a System User Name and Password

First time you access the Administration Page, you need to log on with user
name and a password.
The default user name of the system is admin and the default password of
the system is ip6000. It is strongly recommeded to change the password,
refer to "Changing System User Name and Password"
Configuring KIRK Media Resources
minutes.
.
on page 15-17
11–5