How To Access The Administration Page; Entering A System User Name And Password - Polycom KIRK 6000 Installation And Configuration Manual

How to Access the Administration Page

Note
Click Use the following IP address, and then type 192.168.0.2 in the IP
4
address field.
In the Subnet mask field, type 255.255.255.0.
5
Click OK.
6
You can now reach the base station using a standard web browser.
The web based Administration Page is accessed through a standard web
browser.
Open a web browser.
1
In the browsers Address bar, type http://192.168.0.1, and then press
2
ENTER.
Note: The base station is pre-configured with the IP address: 192.168.0.1
through the ETH port.
The Administration Page for the base station appears.
Figure 12-4 Main page of the Administration Page for base station

Entering a System User Name and Password

First time you access the Administration Page, you need to log on with user
name and a password.
The default user name of the system is admin and the default password of
the system is ip6000. It is strongly recommended to change the password,
refer to "Changing System User Name and Password"
Configuring KIRK Base Station
.
on page 15-23
12–5