Installing Battery On Kirk 3040 Handsets; Installing Battery On Kirk 4020/Kirk 4040/Kirk 4080 Handsets - Polycom KIRK 6000 Installation And Configuration Manual

Installing Battery on KIRK 3040 Handsets

Installing Battery on KIRK 4020/KIRK 4040/KIRK 4080 Handsets

Note
Warning
This section describes how to install the battery on a 3040 Handset.
To install the battery press down the back cover and push it 5 mm
1
towards the headset plug.
Figure 8-1 Remove Back Cover from Handset
Lift off back cover.
2
Place the battery plug in the slot in the battery box.
3
Insert battery with the label readable.
4
Replace the back cover.
5
..
The battery is connected to the handset when it is shipped from the factory.
The battery in a 4080 Handset must not be removed in a potentially
explosive atmosphere. Only use battery type 84743416 in the 4080
Handset.
Preparing KIRK Handset for Use
8–5