Polycom KIRK 6000 Installation And Configuration Manual page 174

KIRK Wireless Server 6000 Installation and Configuration Guide
15–22
Select the file in question, and then click Open.
3
The file to select has the extension .bin.
Click Update.
4
Wait until the system has finished updoading.
Figure 15-34 Adm. Page: Firmware Update Progress Bar
Optionally, you can block new calls during a firmware update by clicking
5
Administration (Administration Page of KWS6000), and then Wireless
Server.
Figure 15-35 Adm. Page WS: Administration/WS page
Under Service Status click Block.
6 When the update is finished, click Reboot to execute the changes.
If you have blocked new calls during a firmware update, enable new calls
7
again by clicking Administration (Administration Page of KWS6000),
then Wireless Server and then clicking Allow.