Local Power Supply; Connecting A Computer To The Kirk Media Resource - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

Local Power Supply

Note

Connecting a Computer to the KIRK Media Resource

Note
11–2
Powering the media resource with a local power supply can be done using the
power input on the unit.
The power supply for the media resource is to be ordered separately (Part
no. EU, UK and US version: 84642468).
The media resource communicates with the computer through a cross-over
patch cable.
The LAN port of the media resource is a RJ45 connector.
Figure 11-1 Cross-Over Patch Cable (RJ45)
Connect the cross-over patch cable to the computer.
1