Kirk 5020/5040/ Handset - Polycom KIRK 6000 Installation And Configuration Manual

Note

KIRK 5020/5040/ Handset

Changing to another System Automatically Using Auto Login B
Auto Login B can be used in separate systems which are overlapping each
other.
Press MENU – go to MENU LOGIN.
1
Press – go to SELECT LOGIN.
2
Press – go to SELECT LOGIN AUTO B.
3
Press .
4
The handset automatically selects a system.
The selected system is marked with a B.
Changing to another System Manually
If you would like to change to another system:
Press MENU - go to MENU LOGIN.
1
Press - go to SELECT LOGIN to subscribe to a system.
2
The actual chosen system is marked with an * or an A (if auto login is
selected).
Press - use the < > keys to scroll between the IDs of the different
3
systems to find the system to which you want to connect.
Under SELECT LOGIN only subscriptions display. Free positions do not
display.
4 Press to confirm.
A handset can be subscribed to more systems and will automatically log on to
the relevant system. If a handset is subscribed to two or more systems, you can
use Auto Login type A to change between the systems automatically.
When to use Auto Login type A:
• Auto Login A should only be used in separate systems without overlaps.
If a handset looses signal from the system (the display showing a no signal
icon), then after 20 seconds the handset will start searching for an
alternative system available from the Login list and automatically change
to this system.
Note: Using Auto Login A any call will be dropped when changing to an
alternative system.
KIRK Handset Registration and Subscription
13–9