Programming The Kirk Repeater With The Servicetool; Table 6-2 Repeater Numbering In A Multi Cell Solution - Polycom KIRK 6000 Installation And Configuration Manual

Programming the KIRK Repeater with the ServiceTool

The ServiceTool is the tool you access from your desktop and use for repeater
programming, handset adjustment and software download to the handset and
repeater.
The ServiceTool identifies the type of repeater, and with this software it is
possible to program the KIRK Repeater to connect to the KIRK DECT Radio
Infrastructure solutions.
Before you start programming the repeater, ensure that the repeater is
connected to the computer and the mains.
In a single cell solution the numbers assigned to the repeaters must be between
2 and 7. The number of the base station is default set to 1.
In a multi cell solution, the numbering of the base stations and repeaters has to
follow the numbering in the table below.
Table 6-2 Repeater Numbering in a Multi Cell Solution
Base Station Repeater 1
0 64
1 65
2 66
3 67
4 68
5 69
6 70
7 71
8 72
9 73
10 74
11 75
12 76
13 77
14 78
15 79
16 80
17 81
18 82
19 83
20 84
21 85
Repeater 2 Repeater 3
128 192
129 193
130 194
131 195
132 196
133 197
134 198
135 199
136 200
137 201
138 202
139 203
140 204
141 205
142 206
143 207
144 208
145 209
146 210
147 211
148 212
149 213
Installing KIRK Repeater
6–9