General Configuration - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

General Configuration

12–10
• "General Configuration"
"Base Station Configuration"
•
• "Security Configuration"
• "Sync. Ways Configuration"
On the General Configuration page you define IP and DNS settings for the
base station.
Click Configuration, and then click General.
1
Figure 12-10 Adm. Page Base Station: Configuration/General page
Click Use static IP address.
2
In the IP addr field, type the IP address of the base station.
3
In the Netmask field, type 255.255.0.0.
4
In the Gateway field, type IP address of the default gateway (optional).
5
The default gateway serves as an access point to another network.
Contact your system administrator for more information.
In the MTU field (Maximum Translation Unit), type the size of the largest
6
packet, that your network protocol can transmit (optional).
7 In the Domain field, type the domain name of the system (optional).
In the Server field (under DNS - Domain Name System), type the IP
8
address of the domain name (optional).
on page 12-10
on page 12-11
on page 12-11
on page 12-11