Local Power Supply; Connecting A Computer To The Kws6000 - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

Local Power Supply

Note

Connecting a Computer to the KWS6000

Note
10–2
Powering the KWS6000 with a local power supply can be done using the
power input on the unit.
The power supply for the KWS6000 is to be ordered separately (Part no.
EU, UK and US version: 84642468).
The KWS6000 communicates with the computer through a cross-over patch
cable.
The LAN port of the KWS6000 is a RJ45 connector.
Figure 10-1 Cross-over patch cable (RJ45)
Connect the cross-over patch cable to the computer.
1