Kirk Wireless Server 6000; Changing System User Name And Password - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

KIRK Wireless Server 6000

Changing System User Name and Password

Note
15–2
This section includes information about:
• "Changing System User Name and Password"
• "Reading System Information"
• "Reading Statistics"
• "Making a Back-Up of the Configuration File"
• "Restoring Configuration File"
• "Updating the KIRK Wireless Server 6000"
• "Restarting the KIRK Wireless Server 6000"
Ensure that you have opened the Administration Page of the KWS6000.
From the Administration Page it is possible to change the user name and
password for the system.
Click Configuration, and then click Security.
1
Figure 15-1 Adm. Page WS: Configuration/Security page
In the Current password field, type the current password.
2
3 In the New user name field, type a user name.
In the New password field, type a new password
4
In the New password again field, type the new password again to
5
confirm it.
6 Click Save to change the password.
on page 15-3
on page 15-6
on page 15-12
on page 15-2
on page 15-10
on page 15-13
on page 15-14