Base Station Configuration
Security Configuration
Sync. Ways Configuration
Checking Indicators
Making a Back-Up of the Configuration File
How to configure the base station:
Click Configuration, and then click Base station.
1
Figure 12-11
Adm. Page Base Station: Configuration/Base station page
In the Host field, type the host name of the KWS6000.
2
3
Click Save.
Click Reboot to enable the configuration changes.
4
It is possible to change the password for the unit.
Refer to
"Security Configuration"
It is necessary to configure the sync. ways of the base station.
Refer to
"Sync. Ways Configuration"
•
Verify that the base station LED indicator is continuously on, indicating
that the base station is functional.
For more information, refer to
on page 15-10.
on page 12-7 for more information.
on page 12-8 for more information.
"Making a Back-Up of the Configuration File"
Configuring KIRK Base Station
12–11