How To Change Internet Protocol Properties Using Windows Xp; Accessing The Web Based Administration Page - Polycom KIRK 6000 Installation And Configuration Manual

Accessing the Web Based Administration Page

How to Change Internet Protocol Properties using Windows XP

Connect the cross-over patch cable to the ETH port of the media resource.
2
In order for your computer to communicate with the media resource it is
necessary to change the computer's Internet Protocol Properties to use the
following:
• IP address: 192.168.0.2
• Sub-net mask: 255.255.255.0
From the Start menu, point to Connect to and then click Show all
1
connections.
A Network Connections window appears.
Configuring KIRK Media Resources
11–3