Connecting A Computer To The Kirk Base Station - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

Connecting a Computer to the KIRK Base Station

Note
12–2
The base station communicates with the computer either through a cross-over
patch cable or through a network with identical net mask, e.g. the IP address:
192.168.0.2 and Sub-net mask: 255.255.255.0.
The LAN port of the base station is a RJ45 connector.
Figure 12-1 Cross-Over Patch Cable (RJ45)
Connect the LAN cable or cross-over patch cable to the computer.
1
Connect the LAN cable or cross-over patch cable to the ethernet
2
connector at the bottom of the base station.