Kirk Repeater - Polycom KIRK 6000 Installation And Configuration Manual

Introduction to KIRK Wireless Server 6000

KIRK Repeater

The repeater can be used to extend the coverage area in a wireless solution.
Depending on the repeater type, it can be mounted either on the wall or on the
ceiling. The wireless repeater is used in areas with limited voice traffic, where
cabling is difficult. The repeater does not increase the number of traffic
channels, but increases the coverage area established with the base station. Up
to three repeaters can be placed in cascade formation directing coverage in a
certain direction.
The base station can support up to 6 repeaters.
For more information about the repeater, refer to "Installing KIRK Repeater"
on page 6-1.
2–5