Kirk Maintenance Software; Administrative Computer; Requirements For The Kirk Wireless Server 6000 Solution; Kirk Wireless Server 6000/Kirk Media Resources - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Maintenance Software

Note

Administrative Computer

Requirements for the KIRK Wireless Server 6000 Solution

KIRK Wireless Server 6000/KIRK Media Resources

Note
The following software application for the installation and maintenance of the
KWS6000 Solution is provided:
• ServiceTool
Used for programming of the repeater, adjustment of the handset and
software download to repeater/handset.
ServiceTool is not used for adjustment of the 5020 Handset.
The ServiceTool application can be downloaded from
www.polycom.com.
An administrative computer is required for configuration and maintenance of
the KWS6000, media resource and base station. This computer may be
temporarily connected directly to the device or to the network. A dedicated
computer is not required.
This section provides information about the environmental and electrical
requirements and software requirements for the KWS6000 solution.

Environmental Requirements

The installation area must:
• be clean, free of traffic and excess dust, dry, and well ventilated
• be within the temperature ranges of 10°C and 40°C/50°F and 104°F
• be between 20% and 80% non-condensing relative humidity
The installation area must be of sufficient height from the floor to prevent
water damage.
Introduction to KIRK Wireless Server 6000
2–7