Kirk Media Resource; Changing System User Name And Password - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Media Resource

Changing System User Name and Password

Note
After Administration Uptime click Soft restart.
2
A warning box appears.
Figure 15-27 Warning box
Click OK.
3
This section includes information about:
• "Changing System User Name and Password"
• "Reading System Information"
"Reading Statistics"
•
• "Updating the KIRK Media Resource Firmware"
Ensure that you have opened the Administration Page of the media
resource.
From the Administration Page it is possible to change the user name and
password for the system.
Click Configuration, and then click Security.
1
Figure 15-28 Adm. Page Media Resource: Configuration/Security page
In the Current password field, type the current password.
2
on page 15-18
on page 15-21
System Management
on page 15-17
on page 15-21
15–17