Kws6000/Kirk Media Resource - Reset Button; Resetting The Kws6000/Kirk Media Resource Hardware - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

KWS6000/KIRK Media Resource - Reset Button

4–6
It is possible to restart or reset the KWS6000/media resource by pressing the
Reset button on the faceplate of the KWS6000/media resource. For description
of the faceplate, refer to

Resetting the KWS6000/KIRK Media Resource Hardware

This section contains a description of the different actions that take place when
pressing the Reset button.
Reset Button Description
Table 4-5
Press button
Short press (2 to 5 sec.)
Long press (5 to 9 sec.)
until front LED flashes
red, then release button
"Faceplate" on page 4-5.
Action
System restarts when button is released.
Resets the system to factory default settings (original
IP settings and empty user data base) and restarts the
system.
Firmware version is not affected.