Kirk Base Station Led Indicators; Front Cover; Faceplate - Polycom KIRK 6000 Installation And Configuration Manual

KIRK Wireless Server 6000 Installation and Configuration Guide

KIRK Base Station LED Indicators

6–4

Front Cover

The base station front cover has one indicator describing the base station faults
and failures. The indicator is off when the base station is not powered. The
LED flashes when the base station initializes. The indicator is on when the base
station is operating.
Table 6-2 LED Indicator Description - Front Cover
LED Indicator
Steady green
Slow green flashing
Fast green flashing
Slow red flashing
Fast red flashing
Steady red
Steady red for 5 seconds
followed by fast red flashing

Faceplate

Figure 6-3 LED Indicator Description - Faceplate
LED Indicator
LINK/Activity Indicator - green
LINK/Activity Indicator - green
flashing
Power Indicator - green
Meaning
OK and idle
OK and active voice call
Active, in operation with the
maximum active connections
(busy)
Missing media resource or base
station (if it is a media resource:
missing connection to KWS6000)
Error
Reset/shutdown in progress
Reset to factory settings
Meaning
Link layer software has
established connection
Activity
KWS6000 is connected to Power