Installing Kirk Codec Module - Polycom KIRK 6000 Installation And Configuration Manual

Installing KIRK Codec Module

Note
This section provides a description of the Codec Module and describes how to
unpack and install it in a media resource. The Codec Module adds a number
of codecs, allowing the wireless server to interface to G.729A/G.723.1 and
other codec standards.
When installing a Codec Module, the media resource only adds 24 voice
channels to the system. Adding 32 media resources with codec cards makes
it possible to have 768 calls at the same time.
For more information about media resources, refer to
Wireless Server 6000 and KIRK Media Resource"
This section contains the following information:
• "Description of KIRK Codec Module"
"Installing the KIRK Codec Module"
•
"Installing KIRK
on page 4-1.
on page 5-2
on page 5-3
5
5–1