Adding A Redundancy Group Member; Redundancy Group License Aggregation Rules - Motorola RFS7000 Series System Reference Manual

Self Healing Radios
5. Refer to the Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
6. Click Close to close the dialog without committing updates to the running configuration.

5.4.2.2 Adding a Redundancy Group Member

Use the Add screen as the means to add a new member (by adding their IP address) to an existing redundancy
group (cluster).
To add a new member to a redundancy group:
1. Select Services
The Redundancy screen displays with the Configuration tab selected.
2. Select the Member
3. Select the Add button.
4. Enter the IP Address of the new member.
5. Click OK to save and add the changes to the running configuration and close the dialog.
6. Refer to the Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
7. Click Cancel to close the dialog without committing updates to the running configuration.

5.4.3 Redundancy Group License Aggregation Rules

The following are rules governing license usage amongst members of a redundancy group:
• A redundancy group license is determined by adding individual switch licenses.
Displays the number of self healing radios on each detected
member. These radios can be invaluable if other radios within the
redundancy group were to experience problems requiring healing
by another radio.
field.
> Redundancy from the main menu tree.
tab.
field.
5-45
Switch Services