View A Mu Statistics Graph - Motorola RFS7000 Series System Reference Manual

4-82 Network Setup
WMM
5. Refer to the Traffic
Pkts per second
Throughput
Avg. Bit Speed
% Non-unicast pkts
6. Refer to the RF Status
Avg MU Signal
Avg MU Noise
Avg MU SNR
7. Refer to the Errors
Avg Num of Retries
% Gave Up Pkts
% of Undecryptable
Pkts
8. Refer to the Status
error messages if something goes wrong in the transaction between the applet and the switch.
9. Click Cancel to close the dialog without committing updates to the running configuration.

4.6.2.2 View a MU Statistics Graph

The MU Statistics tab has an option for displaying detailed MU statistics for individual MUs in a graphical
format. This information can be used for comparison purposes to chart MU and overall switch performance.
To view the MU Statistics in a graphical format:
1. Select a Network
2. Click the Statistics
Displays WMM usage status for the MU, including the access
category currently in use. Use this information to assess whether
the MU is using the correct WMM settings in relation to its
intended data traffic type.
field for the following information:
Displays the average packets per second received by the MU. The
Rx column displays the average packets per second received on the
selected MU. The Tx column displays the average packets per
second sent on the selected MU.
Displays the average throughput in Mbps between the MU and the
access port. The Rx column displays the average throughput in
Mbps for packets received on the selected MU from the access
port. The Tx column displays the average throughput for packets
sent on the selected MU from the access port.
Displays the average bit speed in Mbps on the selected MU. This
includes all packets sent and received.
Displays the percentage of the total packets for the MU that are
non-unicast packets. Non-unicast packets include broadcast and
multicast packets.
field for the following information:
Displays the RF signal strength in dBm for the selected MU.
Displays the RF noise for the selected MU.
Displays the Signal to Noise Ratio (SNR) for the selected MU. The
Signal to Noise Ratio is an indication of overall RF performance on
the wireless network.
field for the following information:
Displays the average number of retries for the selected MU. Use
this information to assess potential performance issues.
Displays the percentage of packets the switch gave up on for the
selected MU.
Displays the percentage of undecryptable packets (packets that
could not be processed) for the selected MU.
field for the current state of the requests made from applet. This field displays
> Mobile Units from the main menu tree.
tab.