Configuring The Virtual Interface - Motorola RFS7000 Series System Reference Manual

4-14 Network Setup
Use the Switch Virtual Interfaces
tabs supporting the following activities:
•

Configuring the Virtual Interface

• Viewing Virtual Interface Statistics
4.4.1 Configuring the Virtual Interface
Use the Configuration screen to view and configure virtual interface details.
1. Select Network
2. Select the Configuration
The following configuration details display in the table:
Name
VLAN ID
DHCP Enabled
Primary IP Address
Primary Subnet Mask Displays the subnet mask assigned for this interface.
Admin Status
Oper Status
screen to view and configure VLAN interfaces. This screen contains two
> Switch Virtual Interface
tab.
Displays the name of the virtual interface.
Displays the VLAN ID associated with the interface.
Displays whether the DHCP client is enabled. A green check mark
defines the DHCP client as enabled for the interface. A red X means
the interface is disabled.
Displays the IP address for the virtual interface.
Displays whether the virtual interface is operational and available
to the switch.
Displays whether the selected Switch Virtual Interface is currently
(Up) or not (Down) on the switch.
from the main tree menu.