Unapproved Aps (Reported By Aps) - Motorola RFS7000 Series System Reference Manual

6-8 Switch Security
5. Click on the Export
(CSV).

6.2.3 Unapproved APs (Reported by APs)

Use the Unapproved APs (Reported by APs)
access port radios and are restricted from operation within the switch managed network. The criteria for
restriction was defined using the
To view access port detected unapproved access points:
1. Select Security >
2. Click on the Unapproved APs (Reported by APs)
3. The Unapproved APs (Reported by APs)
BSS MAC Address
Reporting AP
Channel
Signal Strength
(in dbm)
button to export the contents of the table to a Comma Separated Values file
tab to review access points detected by associated switch
Security > Access Port Intrusion Detection
Access Port Intrusion Detection
table displays the following information:
Displays the MAC Address of each Unapproved AP. These MAC
addresses are access points observed on the network, but have yet
to be added to the list of Approved APs, and are therefore
interpreted as a threat on the network.
If a MAC Address displays on the list incorrectly, click the
button and add the MAC Address to a new Allowed AP index.
Displays the numerical value for the radio used with the detecting
AP.
Displays the channel the Unapproved AP is currently transmitting
on.
Displays the Relative Signal Strength Indicator (RSSI) for the
detected (and unapproved) AP. AP's with a strong signal may pose
a more significant risk within the switch managed network.
> Configuration
from the main menu tree.
tab.
screen.
Allow