Configuring Dhcp Global Options - Motorola RFS7000 Series System Reference Manual
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- Troubleshooting manual (60 pages) ,
- Installation manual (31 pages)
Table of Contents
Advertisement
Additionally, define the network
requests between the DHCP Server and DHCP clients.
NOTE The network IP address and subnet mask of the pool are required to match the
addresses of the layer 3 interface in order for the addresses to be supported
through that interface.
8. Within the
Lease Time
clients:
• Infinite - If selected, the client can use the assigned address indefinitely.
• Actual Interval - Select this checkbox to manually define the interval for clients to use DHCP
supplied addresses. The default lease time is 1 day, with a minimum setting of 10 seconds and a
maximum value of 946080000 seconds.
9. Within the
Servers
buttons to add and remove the IP addresses of the routers used.
10. Provide the
Included Ranges
Use the
Insert
and
A network pool without any include range is as good as not having a pool, because it won't be useful
in assigning addresses.
11. Click
OK
to save and add the changes to the running configuration and close the dialog.
12. Refer to the
Status
The Status is the current state of the requests made from the applet. Requests are any "SET/GET"
operation from the applet. The Status field displays error messages if something goes wrong in the
transaction between the applet and the switch.
13. Click
Cancel
to close the dialog without committing updates to the running configuration
5.2.1.3 Configuring DHCP Global Options
The DHCP Server screen's Configuration tab can be used to display an additional
To define new global name and value and send it to other peer switches in the mobility domain:
1. Select
Services
2. Highlight an existing pool name from within either the Configuration tab and click the
button.
3. Click the
Insert
button to display an editable field wherein the name and value of the DHCP option
can be added.
IP Address
field, define one of the two kinds of leases the DHCP Server assigns to its
field, change the server type used with the pool and use the
(starting and ending IP addresses) for this particular pool.
Remove
buttons as required to define the range of supported IP addresses.
field.
>
DHCP Server
from the main menu tree.
and
Subnet Mask
used for DHCP discovery and
5-9
Switch Services
Insert
and
Remove
Global Options
screen.
Options Setup
Advertisement
Table of Contents
