Reviewing Bandwidth Settings - Motorola RFS7000 Series System Reference Manual

4-104 Network Setup
The CW Maximum is combined with the CW Minimum to define the Contention Window. From this
range, a random number is selected for the back off mechanism. Lower values are used for higher
priority traffic.
8. Select the Admission Control
This may be useful when multimedia traffic would be negatively impacted by an abundance of MU
traffic. This setting is not selected by default, but once enabled, has a default value of 32 stations
(MUs).
9. Refer to the Status
error messages if something goes wrong in the transaction between the applet and the switch.
10. Click OK to use the changes to the running configuration and close the dialog.
11. Click Cancel to close the dialog without committing updates to the running configuration.

4.7.5 Reviewing Bandwidth Settings

Refer to the Bandwidth tab to view the QoS weight associated with each radio when added to a WLAN. The
weight represents the switch priority assigned to the traffic transmitted from the radio for the WLAN.
For information on revising the weight assigned to each radio in respect to its intended operation within its
assigned WLAN, see Editing the WLAN Configuration on page
To view existing radio bandwidth weight settings:
1. Select Network
2. Click the Bandwidth
Bandwidth information displays per radio with the following data:
Index
checkbox to enable the restriction of MUs using the WMM policy.
field for the current state of the requests made from applet. This field displays
> Access Port Radios from the main menu tree.
tab.
Displays the identifier assigned to each radio. This numerical
identifier is helpful in differentiating radios with similar
configurations.
4-27.