Motorola RFS7000 Series System Reference Manual page 171

2. Click the Configuration
3. Refer to the table for the following information:
Index
Description
AP Type
Type
Adopted
Parent AP MAC
Address
MAC Address
State
VLAN
tab.
Displays the numerical index (device identifier) used with the
device radio. Use this index (along with the radio name) to
differentiate the radio from other device radios.
Displays a user assigned name for the radio.
Displays the type of access port detected. The switch supports
Motorola AP-300 model access ports.
Use the Type to identify whether the radio is 802.11a radio or an
802.11bg radio.
Displays the radio's adoption status. If the radio is adopted, a green
check displays. If the radio is not adopted, a red X displays.
Displays the access port's Ethernet MAC (the device MAC address
that is printed on the casing of the unit). Please do not confuse this
BSSID MAC with the access port's Ethernet MAC address.
The Base Radio MAC is the radio's first MAC address when it is
adopted by the Switch.
Display the radio's current operational mode. If the radio is set as
a Detector AP, the state is "Detector", otherwise the state is
"Normal".
Displays the name of the VLAN currently used with each access
port radio.
4-85
Network Setup