Motorola RFS7000 Series System Reference Manual page 161

RFS7000(config-wireless)#wlan 1 nac-server secondary radius-key my
secret-2
RFS7000(config-wireless)#
3. MUs not NAC authenticated use Radius for authentication. To configure the WLAN's Radius settings:
a. Configure the Radius server's IP address.
RFS7000(config-wireless)#wlan 1 radius-server primary 192.168.1.30
RFS7000(config-wireless)#
b. Configure the server's Radius Key
RFS7000(config-wireless)#wlan 1 radius-server primary radius-key my-rad-
secret
RFS7000(config-wireless)#
c. Configure the secondary Radius server's IP address.
RFS7000(config-wireless)#wlan 1 radius-server secondary 192.168.1.40
RFS7000(config-wireless)#
d. Configure the secondary server's Radius Key.
RFS7000(config-wireless)#wlan 1 radius-server secondary radius-key my-
rad-secret-2
RFS7000(config-wireless)#
4. Configure the NAC server's timeout and re-transmit settings. The timeout parameter configures the
duration for which the switch waits for a response from the Radius server before attempting a retry.
This is a global setting for both the primary and secondary server.
The re-transmit parameter defines the number of retries a switch attempts before dis-associating
the MU.
RFS7000(config-wireless)#wlan 1 nac-server timeout 30 retransmit 10
RFS7000(config-wireless)#
5. Configure WLAN for EAP authentication and define the encryption type.
RFS7000(config-wireless)#wlan 1 authentication-type eap
RFS7000(config-wireless)#wlan 1 encryption-type wep128
RFS7000(config-wireless)#wlan 1 ssid wlan-1
4-75
Network Setup