Motorola RFS7000 Series System Reference Manual page 448
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- Troubleshooting manual (60 pages) ,
- Installation manual (31 pages)
Table of Contents
Advertisement
B - 4
RFS7000 Series Switch System Reference Guide
B.1.5 Switch Discovery
For an AP-51XX to function as an AAP (regardless of mode), it needs to connect to a switch to receive
its configuration. There are two methods of switch discovery:
• "B.1.5.1 Auto Discovery using DHCP"
• "B.1.5.2 Manual Adoption Configuration"
B.1.5.1 Auto Discovery using DHCP
Extended Global Options 189, 190, 191, 192 can be used or Embedded Option 43 - Vendor Specific
options can be embedded in Option 43 using the vendor class identifier: MotorolaAP.51xx-V2-0-0.
NOTE
To support switch discovery, a RFS7000 model switch must be running
firmware version 1.1 or higher. The access point must running firmware
version 2.0 or higher.
List of Switch IP addresses
(separate by comma, semi-colon, or space delimited)
Switch FQDN
AP-51XX Encryption IPSec Passphrase (Hashed)**
AP-51XX switch discovery mode
1 = auto discovery enable
2 = auto discover enabled (using IPSec)
Code
Data Type
188
String
190
String
191
String
192
String
Advertisement
Table of Contents
