Editing An Existing Rule - Motorola RFS7000 Series System Reference Manual
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- Troubleshooting manual (60 pages) ,
- Installation manual (31 pages)
Table of Contents
Advertisement
6-26
Switch Security
9. If the selected
Protocol
and destination Port.
10. Use the
Source Address
11. Refer to the
Status
error messages if something is wrong in the transaction between the applet and the switch.
12. Click
OK
to use the changes to the running configuration and close the dialog.
13. Click
Cancel
to close the dialog without committing updates to the running configuration.
6.5.2.3 Editing an Existing Rule
As network and access permission requirements change, existing ACL rules need to be modified to be relevant
with new client access requests.
To modify an existing ACL rule:
1. Select
Security
>
2. Click on the
Configuration
3. Select an ACL from the ACLs field.
The rules associated with the selected ACL display in the Associated Rules section.
4. Click the
Edit
button within the Associated Rules field.
5. Use the
Precedence
is
tcp
or udp, click the
field to enter the IP address from where the packets are sourced.
field for the current state of the requests made from applet. This field displays
ACLs
from the main menu tree.
tab.
field to modify the precedence (priority) value between 1 and 5000.
Protocol Options
button to configure the source
Advertisement
Table of Contents
