Configuring Dhcp Server Relay Information - Motorola RFS7000 Series System Reference Manual
Rf switch
Hide thumbs
Also See for RFS7000 Series:
- Reference manual (732 pages) ,
- Troubleshooting manual (60 pages) ,
- Installation manual (31 pages)
Table of Contents
Advertisement
2. Click the
Excluded
The Excluded tab displays "fixed" IP addresses statically assigned and unavailable for assignment
with a pool.
3. Click the
Edit
button to modify the IP address range displayed. For more information, see
Editing the Properties of an Existing DHCP Pool on page
4. To delete an existing DHCP pool from the list of those available to the switch, highlight the pool from
within the Network Pool field and click the
5. Click the
Add
button to create a new IP address range for a target host pool. For more information,
see
Adding a New DHCP Pool on page
5.2.4 Configuring DHCP Server Relay Information
Refer to the
Relay
tab to view the current DHCP Relay configurations for available switch VLAN interfaces.
The Relay tab also displays the VLAN interfaces for which the DHCP Relay is enabled/configured. The Gateway
Interface address information is helpful in selecting the interface suiting the data routing requirements
between the External DHCP Server and DHCP client (present on one of the switch's available VLANs).
NOTE DHCP Server and relay can run on different switch VLAN interfaces.
tab.
Delete
5-7.
Switch Services
5-6.
button.
5-13
Advertisement
Table of Contents
